Human Body Scanner Technology Information

We need through the security check before boarding at the airport, in order to make the passengers are more likely to accept security body, adopted at the airport body scanners, can be in contact with the case of body whole body scan of passengers, passengers can more easily accept the non-contact scanning way.
We need to know more related information about human body scanner.

In order to ensure the luggage scanner of higher sensitivity, the human body scanner machine continuously research and development, production out of the new scanner. The characteristics of the new body scanner technology are: gemstones, diamonds, pearls, agate, jade and other non-metallic jewelry appeared completely; Preset nowhere to hide bombs and drugs in the human body; Respect personal privacy, not prominent surface characteristics, detection without contact with the human body; Detection of high efficiency, single detection time less than 2 seconds;

Radiation dose is close to natural background, a test dose equivalent to fly only 4 minutes of natural radiation, will not cause any harm to human body.
The body scanner technology parameters.

Spatial resolution: can distinguish line to a diameter of 1.6 mm.
Line resolution: equipment can distinguish the nominal diameter of 0.211 mm single solid core copper wire.

Can distinguish human body through resolution: device into a 300 mm thick body the nominal diameter of the 3 mm and 5 mm thick wire of organic matter.
Single detection time: less than 2 seconds/time
Single test dose: 0.36uSv (a plane 50 ~ 100uSv).
Working environment: temperature: 5 ℃ ~ + 40 ℃, humidity: 0% ~ 80%
Storage environment: temperature: - 10 ℃ ~ + 60 ℃, humidity: 10% ~ 90%
The machine power consumption: less than 1000 (W)
The human baggage inspection supplier technical characteristics:
1, low radiation dose, no harm to human body
A test dose, equivalent to the Shanghai to Beijing flight 4 minutes of natural radiation, will not cause any harm to human body.
2, high security inspection machine efficiency
Non-invasive body check, no need manual search, single detection time less than 2 seconds, to ensure efficient operation of the airport security work.
3, testing effect is good
Use weak photon perspective technique, can penetrate the human body, can detect the measured personnel carries metal and nonmetal material, liquid, and the body hidden drugs and bombs, effectively eliminate threats, let terrorists nowhere to hide!
4, privacy and respect for individuals
Millimeter wave and back scattering body scanner technology, compared DSBS -i used weak photon imaging technology and it does not display surface images, can be perfectly protect their privacy.
5, X Ray baggage scanner company design reasonable, safe and reliable
Measured personnel safety, give full consideration to the operator with good shielding, no leakage, the regular maintenance of professional at the same time that to be seized and the operator has no trouble back at home.

Through comparative analysis with other body scanner technology, the new body scanners have update and progress on technology, but also reduced the body scan spending, makes security program is simple and quickly.

Training to Meet Evolving Market Needs

To ensure it meets future customer needs and continues to accelerate its growth, integrated security solutions manufacturer Eastimage is implementing a number of new training initiatives to maintain the flexibility and adaptability of its employees. As part of this, the China X Ray baggage scanner manufacturer sales team has participated in Dale Carnegie training to centre its attention on long-term strategies for growth centred around the customer journey.

Members of the Eastimage sales team have taken part in a Dale Carnegie course entitled ‘Sales Advantage’ which aims to strengthen the overall sales process. Eastimage’s Director of UK Sales, Adam Norris commented, “It’s vital that Eastimage continues to grow its sales strategy and portfolio to match the market needs, so as part of our ongoing development we have taken part in Dale Carnegie’s world-renowned training. Since the economic downturn, the market has rightly become much more focussed on what customers need and expect, as opposed to simply selling standardised products. We want to be perfectly positioned to meet these needs and continue to provide precisely the purchasing experience that customers expect from Eastimage”

The training proved to be a highly valuable experience for the team, as Adam Norris elaborated, “Our team attended the course and I am proud to say our results put us firmly in the top third of the class. It demonstrated our strengths but also suggested new ways to enhance our sales process. It was a highly useful experience, which will become a key part of our ongoing strategy.” Key elements of the course included:

Building credibility and rapport with customers
Providing solutions customers really want
Resolving objections in a clear and confident way
Demonstrating commitment to customers and gaining commitment from customers
Discovering the technique for uncovering hidden opportunities
Discovering planning techniques that work
Mastering the selling process
As well as implementing the Dale Carnegie training for its sales team, Eastimage luggage scanner  is also assisting teams across its divisions with professional and personal development to ensure, as an organisation, that it is flexible and fully embraces customer and market demands. Along with sales training, Eastimage is also providing development opportunities including AAT (Association of Accounting Technicians) training for members of its accounts team and NVQ training for members of the customer service team.

Director of China X Ray baggage scanner company commented, “We are dedicated to making the Eastimage team the best it can be, so promoting professional development is a key part of this process. The benefits are two-fold – we are able to offer our team a well-targeted career development path which provides them with skills and training that will benefit Eastimage’s operations and their own aspirations as well. Secondly, any business is only as good as its people, so any improved skills or processes will also benefit our customers and partners, making it fully rewarding to do business with Eastimage. We feel that nurturing talent and encouraging development is a key reason that Eastimage continues to grow its business year on year.”

China X Ray baggage scanner exporter account team is benefitting from an AAT course for Level 2 Certificate in Accounting. Lucy explained, “I am due to complete the Level 2 Certificate in July, with the aim of doing Level 3 next year. Eastimage is helping me to expand my skills and training whilst working, which undoubtedly benefits our customers but also gives me great scope to further my career at the same time.”

Eastimage Technical Support Engineer Michael Lee joined Eastimage last year and is now studying for an NVQ in Customer Support in conjunction with his day-to-day role. Michael commented, “The NVQ helps me to plan and assess the way I interact with our customers. It’s a one-year course and includes a lot of training on rules and regulations as well as practical ways to enhance the way I work. I produce anonymous case studies on various real-life situations and challenges to demonstrate how I put my new skills into practise. It’s very useful to have the support of Eastimage in completing this qualifications as it will benefit me personally as well as adding value to the service we provide customers.”

You Can Know Working Principle of X Ray Machine

The basic line control instruments by the oscillator, phase shift and amplitude bridge, selected frequency amplifier , detector ultra-low frequency amplification emitter fit one-shot swing, power supply.

Portable metal detector (grounds 15kHz oscillator generates a sinusoidal voltage detection coil fed detection coil by a master transmitter coil) basic principle is important. It includes two vice- ring and the input transformer, output transformer. Vice- ring located on the main transmitter groups on both sides of laps, lap distance equal to the primary transmitter and symmetrical, and cross-linked with each other to form a differential coil. When 15 kHz sine wave oscillator generates a sinusoidal alternating voltage of the transformer is fed through the input master transmitter coil, thus producing 15 kHz alternating magnetic field, and two pairs of the cutting ring in the main loop by transmitting a large alternating current.

Because of the two vice- lap main launch yet another lap distance symmetrical cross chain, while the induction of an equal magnitude but opposite direction (phase difference of 180 °) of the EMF 15kHz offset each other ( due to the relationships that we cannot process the two deputy circle the main circle done completely symmetrical, and shielding materials outside influence, there is always a mV output transformer unbalanced signal output level , and we want it as small as possible ). When no metal probe into the circle , only a faint 15kHz signal output amplitude imbalance, this signal after amplification by a DC voltage detector becomes blocking capacitor being blocked, you cannot enter the post-amplifier, then the instrument still in a relatively stable state.

Once the metal into the detection coil, metal is at 15kHz alternating magnetic field, generated EMF , eddy current phenomena, so the relative balance detection coil is destroyed, and produce low-frequency pulsating electrical potential difference, this pulsating potential difference is set out in the original such as the amplitude imbalance signal input to the amplifier amplifies. When you buy metal detector, according to portable metal detector, metal signal through the first-stage amplifier, 3000 a magnitude has been amplified 4000 times, and then into the detector to remove the useful signal from the low-frequency amplifier unbalanced signal sending trade deficit, but also get more than 1000 -fold magnification. At this point the signal from the original metal microvolt signals become amplified by several orders of magnitude volts, and after reaching the trigger voltage level trigger, the trigger work led relay, an alarm signal, and control objects required for automatic control. For example, cut off the power supply load, lit lights, sound signals, etc., based on these, we can determine the presence or absence of metal.


Portable metal detector, which possesses security screening system, is designed to detect people or objects carrying metal objects. It can detect the parcels, baggage, mail, etc. within the fabric brought weapons, explosives or small metal objects people carry. You should know particularly sensitive to the appearance of its surface make operation simple and easy. Superior ring sensor type hand probe.

Related info: baggage scanner price | liquid Inspection equipment | x ray baggage scanner price | x-ray bag scan equipment

- See more at: http://www.eastimagesecurity.com/IndustryNews/Basic-Principle-of-Portable-Metal-Detectors.shtml#sthash.IPM22X2s.dpuf

EI-V4000 High Sensitivity Detector

EI-V4000 High sensitivity digital walkthrough metal detection gate use excellent electromagnetic testing and digital processing technology，achieve high sensitive as a tiny metal piece like a paper clip can be detected; Continuous detection without constituencies’ limited. Eastimage is the first company who reach the A level Chinese national testing standards in China.
Main Features
Precision number of bidirectional counting function
Pure digital processing technology featuring proprietary "multi-layer overlapping coil"
Auto detected, working time status display, self-diagnosis and audio-light alarm for future
Super anti-interference ability, normal working distance is 30cm; smallest distance can be 5cm under special environment
Original "fly" detection technology, detection performance not affected by any surrounding static and dynamic metals
Super environment adaptive capacity, auto select best frequency, manual select 100 options
Made by high-strength materials, powerful ability of waterproof, fireproof, anticorrosive and shockproof
24Hrs working normally under open-air and scorching sun
Application
EI-4000 is designed for Prison, Bus Station, Bank, Airport, Factory and other critical areas.


Technical Specifications
Size & Weight.................................................2235 mm（L）x 838mm（W）x 705mm（H）/ 75KG
Tunnel Size.....................................................2055 mm (H) x 720 mm (W) x 705 mm (Deep)
Working Temperature / Humidity....................- 20℃～+ 45℃／0%～95% (non-condensing)
Storage Temperature/Humidity.......................-40℃～+ 60℃／20%～95% (non-condensing)
Power Supply..................................................AC100V~240V/ 50~60 (Hz）
Power Consumption.......................................30W

More info:
China X Ray scanning machine company
baggage inspection supplier
X Ray baggage scanner on sales
Identity recognize system

Provide You With Luggage Detector of Any Color and Shape

World leading luggage detector factory has a high standard of reliability in the tracked trajectory in terms of evaluating the overall detection event in which an alarm will be triggered if the goods inspection confidence score surpasses a given threshold. However, according to a number of luggage detector factory, this threshold can be largely adjusted by the detector users in order to achieve different degrees of security system sensitivity since the work flow and load might differ in a variety of cases. What is more, different luggage detector factory is basically devoted to different kinds of detection products.

For instance, Hand Hold liquid detector  makes use of the foreground sampling method which is capable of localizing the suspicious luggage while some others may utilize the luggage selective modules according to the experimental results so as to further indicate the alarm timing. To be more specific, during the first stage of the luggage detector factory production system, the detection sampling is in generally carried out in an attempt to localize static luggage and items within the camera view. At the same time, some of the abandoned luggage as well as items might be scanned according the detection program set by the world leading luggage detector factory.

High sensitivity digital walkthrough metal detector technique is an imitation of the human ability to focus its attention on some objects of interest, which is especially true with the objects that can be identified by logical reasoning of the luggage detection devices, including some luggage items. Therefore, other irrelevant objects can be ignored by the luggage detector factory within the same scene when producing the luggage detectors.
On the other hand, a number of luggage detector factories make use of the luggage appearance based models in locating and analyzing luggage items in question so their products can deal with an array of luggage of any color and shape in an easy manner and will not be influenced by different viewing angles. This is because questionable luggage as well as abandoned luggage is assumed to remain static for more than ten seconds in a row so that at least five video clips will be collected from the luggage detector samples so the detection performance standard can be ensured.

Another aspect of the China X Ray baggage scanner company is that its background model is often constructed using selected detection frames from the standard test sequences in which the luggage images and data are minimized in the first place so as to make the detection and analysis processes faster. Therefore, in situations where the luggage detector factory background frames are unavailable, foreground clutter is essential even though the average number of selected frames is already comprised in the package.

- See more at: http://www.eastimagesecurity.com/IndustryNews/Luggage-Detector-Deals-With-Any-Color-and-Shape.shtml#sthash.oycoek5v.dpuf